Physical Address

304 North Cardinal St.
Dorchester Center, MA 02124

How To Reset Targus Docking Station

If you're experiencing issues with your Targus docking station, a reset may be the solution. In this guide, we'll show you how to reset your Targus docking station in just a few simple steps.

By following these instructions, you'll be able to quickly troubleshoot any problems and get your docking station back up and running smoothly.

So let's get started and get your Targus docking station reset in no time.

Key Takeaways

  • There are two methods to reset a Targus docking station: without data loss and with the reset button.
  • Resetting the docking station will restore it to factory settings and clear any previous configurations or issues.
  • Customized settings or configurations will be lost during the reset process.
  • After resetting the docking station, it is important to test the functionality of the dock by connecting devices and ensure that all cable connections are secure.

Unplug the Docking Station From Power

To begin resetting your Targus docking station, unplug it from power. This step is crucial as it ensures that there's no electrical current flowing through the device, allowing for a complete reset. Locate the power cord connected to the docking station and gently remove it from the power outlet. It's important to handle the cord with care to avoid any damage to the connectors.

Once the docking station is unplugged, wait for a few seconds to allow any residual power to dissipate. This short pause helps to ensure a clean reset and allows the device to fully power down. During this time, you may want to double-check that all other cables, such as USB or Ethernet, are also disconnected from the docking station.

After the brief waiting period, you can proceed to the next steps in the resetting process. Remember to keep the docking station unplugged until you have completed all the necessary troubleshooting steps. Only then should you reconnect the power cord and other cables to resume normal operation.

Disconnect All Devices From the Docking Station

To reset your Targus Docking Station, it's important to first disconnect all devices from the dock. Safely removing devices ensures that there are no connection issues or data loss during the reset process.

Safely Removing Devices

Disconnect all devices from the docking station before resetting it. This is an important step to ensure a smooth and successful reset process. Safely removing devices can help prevent any potential data loss or damage to the devices or the docking station itself.

To safely remove devices from the docking station, follow these steps:

  • Save and close all open files and applications to avoid any data loss.
  • Eject any removable storage devices such as USB drives or SD cards by right-clicking on the device icon in the system tray and selecting 'Eject'.
  • Disconnect any external monitors by unplugging the video cables from the docking station.
  • Disconnect any peripherals such as keyboards, mice, printers, or speakers by unplugging them from the docking station.

Troubleshooting Connection Issues

To troubleshoot connection issues with your Targus docking station, begin by disconnecting all devices from the docking station. This step is crucial as it allows you to isolate the issue and determine whether it's related to a specific device or the docking station itself.

Start by unplugging all cables and removing any devices that are currently connected, such as monitors, keyboards, mice, and Ethernet cables. Once all devices have been disconnected, wait for a few minutes to ensure that any residual power is discharged.

Afterward, reconnect the docking station to your computer and plug in the power adapter. Then, gradually reconnect each device one at a time, testing the connection after each one to identify any potential issues.

Resetting Without Data Loss

Now, let's delve into resetting the Targus docking station without losing any data by disconnecting all devices from the docking station.

To do this, follow these steps:

  • Power off the docking station by disconnecting the power adapter from the wall outlet.
  • Disconnect all devices connected to the docking station, including monitors, keyboards, mice, and any other peripherals.
  • Wait for about 30 seconds to ensure that the docking station is completely powered off.
  • Reconnect the power adapter to the wall outlet and turn on the docking station.

By following these simple steps, you can reset the Targus docking station without losing any data. This process allows you to troubleshoot any issues you may be experiencing without the risk of data loss.

Remember to reconnect all devices once the reset is complete.

Press and Hold the Reset Button on the Docking Station

To reset your Targus docking station, you can press and hold the reset button located on the docking station. This can be done even if the docking station isn't powered on.
Press and hold the reset button for about 10 seconds, then release it.

Resetting Without Power

Hold down the reset button on your Targus Docking Station to perform a powerless reset. This method allows you to reset the docking station even when it isn't connected to power. Here are the steps to perform a reset without power:

  • Locate the reset button on your Targus Docking Station.
  • Press and hold the reset button using a small pointed object, such as a paperclip or pen.
  • Keep holding the button for about 10 seconds.
  • Release the reset button after the specified time.

Performing a powerless reset can help resolve issues with the docking station, such as connectivity problems or unresponsive devices. It essentially restores the docking station to its default settings, clearing any temporary glitches or errors. Remember to reconnect the docking station to power after performing the reset.

Resetting Multiple Devices

You frequently reset multiple devices by pressing and holding the reset button on your Targus Docking Station. This function allows you to simultaneously reset multiple connected devices, such as monitors, keyboards, and mice, to their default settings.

To initiate the reset process, locate the reset button on the docking station. It's typically a small, recessed button that may require a paperclip or similar tool to press.

With all the devices connected to the docking station, press and hold the reset button for approximately 10 seconds. Release the button and wait for all the devices to power off and then power back on.

This reset procedure helps resolve compatibility issues, connectivity problems, and other technical glitches that may arise with multiple devices connected to the docking station.

Resetting Not Working?

If resetting your Targus Docking Station isn't working, try pressing and holding down the reset button on the docking station for at least 10 seconds. This can help resolve any issues that may be preventing the reset process from completing successfully.

Here are a few things to keep in mind when trying this method:

  • Make sure you're pressing and holding the reset button firmly for the entire 10 seconds.
  • Ensure that the docking station is connected to a power source during the reset process.
  • Check that all devices connected to the docking station are properly disconnected before attempting the reset.
  • If the reset button doesn't seem to respond, try using a small, pointed object like a paperclip to press and hold the button.

Keep the Reset Button Pressed for 10 Seconds

To initiate the reset process, maintain pressure on the reset button for a duration of 10 seconds. This step is crucial in resetting your Targus docking station and resolving any issues you may be experiencing. The reset button is typically located on the back or side of the docking station, and it's a small, recessed button that requires a pointed object, such as a paperclip or pen, to press.

When you press and hold the reset button for 10 seconds, you're effectively performing a hard reset on the docking station. This action will restore the docking station to its factory settings and clear any previous configurations or issues that might've been causing problems. It's important to note that by performing a reset, you'll lose any customized settings or configurations you have made on the docking station.

During the 10-second period, make sure to maintain a consistent and firm pressure on the reset button. This ensures that the reset process is initiated correctly. It's recommended to use a timer or count in your head to accurately measure the duration.

After the 10 seconds have passed, release the reset button. The docking station will then restart and go through its startup sequence. This process may take a few moments, so be patient. Once the docking station has fully restarted, it should be reset and ready for use.

If you're still experiencing issues with your Targus docking station after performing the reset, it may be necessary to troubleshoot further or contact Targus customer support for assistance.

Release the Reset Button

After completing the 10-second reset process, the next step is to release the reset button on your Targus docking station. Releasing the reset button allows the dock to fully reset and restore its default settings.

Here are the steps to release the reset button:

  1. Gently remove your finger from the reset button: Make sure that you remove your finger from the reset button in a slow and controlled manner. Avoid pressing it again accidentally, as this may interrupt the reset process.

  2. Wait for the dock to power back on: Once you release the reset button, the docking station will begin to power back on. It may take a few moments for the dock to fully boot up and become operational again.

  3. Observe the LED indicators: While the dock is powering back on, keep an eye on the LED indicators. These lights provide useful information about the dock's status. Wait until the LEDs stabilize and indicate that the dock is ready for use.

  4. Test the dock: Once the dock has powered back on and the LEDs have stabilized, you can test its functionality. Connect your devices to the dock and ensure that they're recognized and functioning properly.

Reconnect the Docking Station to Power

Once you have released the reset button, you will need to reconnect the Targus docking station to power. Follow these steps to ensure a successful reconnection:

  1. Power Adapter: Locate the power adapter that came with your docking station. It should have a DC plug on one end and a standard wall plug on the other.

  2. DC-In Port: Plug the DC plug of the power adapter into the DC-in port on the back of the docking station. This port is usually labeled with a lightning bolt symbol.

  3. Wall Outlet: Connect the standard wall plug of the power adapter into a nearby wall outlet. Ensure that the outlet is functioning properly by plugging in another device and confirming that it receives power.

  4. Power Indicator: Once the power adapter is connected, check the power indicator on the docking station. This indicator is typically located on the front or top panel and will light up to indicate that the docking station is receiving power.

  5. Verify Connection: To confirm that the docking station is properly connected to power, check if any connected devices are being powered on or charging. If they are functioning as expected, then the reconnection process was successful.

Table:

Step Instructions
1. Locate the power adapter.
2. Plug the DC plug into the DC-in port on the docking station.
3. Connect the standard wall plug into a wall outlet.
4. Check the power indicator on the docking station.
5. Verify if connected devices are receiving power.

Follow these steps to ensure a proper reconnection of the Targus docking station to power.

Reconnect Your Devices to the Docking Station

Now reconnect your devices to the docking station. Follow these steps to ensure a smooth and successful reconnection:

  • Check the cable connections: Make sure all cables are securely connected to both the docking station and your devices. Inspect the USB, HDMI, and power cables to ensure they're properly plugged in.

  • Restart your devices: Power off and then power on your devices, including your laptop, monitor, and any other peripherals connected to the docking station. This will help establish a fresh connection between the devices and the docking station.

  • Update drivers: Check for any available driver updates for your docking station. Visit the manufacturer's website or use their software to download and install the latest drivers. This can help resolve any compatibility issues and ensure optimal performance.

  • Test each device: After reconnecting your devices, test each one to ensure they're functioning correctly. Check if the monitor displays properly, the keyboard and mouse respond, and any other peripherals are recognized by your laptop.

By following these steps, you should be able to successfully reconnect your devices to the Targus docking station. Remember to double-check all cable connections, restart your devices, update drivers if necessary, and test each device for proper functionality.

If you encounter any issues, refer to the manufacturer's support resources or contact their customer support for further assistance.

Frequently Asked Questions

Can I Reset My Targus Docking Station Without Unplugging It From Power?

Yes, you can reset your Targus docking station without unplugging it from power.

To do this, locate the reset button on the docking station.

Press and hold the reset button for about 10 seconds until the docking station's lights turn off and then back on.

This will reset the docking station and resolve any potential issues.

Remember to check the user manual for specific instructions related to your model.

What Happens if I Don't Disconnect All Devices From the Docking Station Before Resetting It?

If you don't disconnect all devices from the docking station before resetting it, there's a chance that data transfer or device functionality could be disrupted.

It's recommended to remove all devices from the docking station before performing a reset to ensure a smooth process and prevent any potential issues.

How Can I Identify the Reset Button on My Targus Docking Station?

To identify the reset button on your Targus docking station, look for a small button usually located on the back or side of the device. It may be labeled as 'Reset' or have a small circular arrow symbol.

Press and hold this button for about 10 seconds to initiate the reset process.

Remember to disconnect all devices from the docking station before resetting, as not doing so may cause data loss or damage to the connected devices.

Is It Necessary to Keep the Reset Button Pressed for Exactly 10 Seconds, or Can I Release It Earlier?

To properly reset your Targus docking station, it's important to understand the duration for which you need to press the reset button.

The question at hand is whether you can release the button before the 10-second mark. The answer to this is no.

It's necessary to keep the reset button pressed for exactly 10 seconds to ensure a successful reset. Releasing it earlier may not have the desired effect and could result in an incomplete reset.

What Should I Do if My Docking Station Doesn't Reconnect to Power After Resetting It?

If your docking station doesn't reconnect to power after resetting it, there are a few steps you can take.

First, make sure that:

  • the power adapter is securely plugged into both the docking station and the power outlet.
  • the power outlet is working by plugging in another device.

If the issue persists, try:

  • using a different power adapter or USB cable.

If none of these steps resolve the issue, contact Targus customer support for further assistance.

Conclusion

To reset a Targus docking station, follow these steps:

  1. Unplug the docking station from power.
  2. Disconnect all devices connected to the docking station.
  3. Press and hold the reset button for 10 seconds.
  4. Release the reset button.
  5. Reconnect the docking station to power.
  6. Reconnect your devices to the docking station.

By following these steps, you can successfully reset your Targus docking station. This will help you troubleshoot any issues and restore its functionality.

Sharing is caring.
Alex Mitchell
Alex Mitchell

Alex Dockman is an IT Systems Engineer and tech enthusiast with a knack for making complex technology topics understandable. With a background in Computer Science and hands-on experience in Silicon Valley, he shares his insights on docking stations and connectivity solutions, helping readers navigate the tech world. Alex's writing is known for its clarity and precision, making technology accessible to all.

Leave a Reply

Your email address will not be published. Required fields are marked *