Physical Address

304 North Cardinal St.
Dorchester Center, MA 02124

How To Fix Dji Phantom 3 Battery Not Charging

If you're encountering the frustrating issue of your DJI Phantom 3 battery not charging, there are several troubleshooting steps you can take to address this concern effectively.

From inspecting the charger and firmware updates to examining battery temperature and cell health, a systematic approach can often pinpoint the root cause of the problem.

By following these steps diligently, you can enhance the overall performance and longevity of your drone's battery, ensuring smooth operation for your aerial endeavors.

Key Takeaways

  • Check charger for damage and wall socket functionality
  • Update firmware to resolve potential issues
  • Monitor battery temperature within safe range
  • Inspect and maintain pins for optimal charging

Charger Inspection

During charger inspection, it is essential to carefully examine for any signs of damage or malfunction that could impact the charging process. Inspect the charger for any broken wires or visible damage that may hinder proper charging functionality.

Additionally, check the functionality of the wall socket to ensure it is providing power before connecting the charger. If any wires are found to be damaged, it is advisable to replace the charger promptly to prevent charging issues.

Broken chargers will not effectively charge the DJI Phantom 3 battery, so a thorough inspection is crucial for troubleshooting any charging problems. Before attempting to charge the battery, ensure that the charger is in good condition and properly connected to both the drone and the power source.

Firmware Update

After ensuring the charger's integrity and functionality, the next crucial step in troubleshooting a DJI Phantom 3 battery not charging is to address potential firmware issues by updating the drone's software through the DJI GO app. It is essential to check for any inconsistent firmware notifications in the DJI GO app as they may indicate firmware-related problems affecting battery charging. Updating the aircraft's firmware can help resolve compatibility issues that may be impacting the charging process. Users should utilize the PlayStore or AppStore to download the latest firmware update specifically designed for the DJI Phantom 3 drone. Regularly checking for firmware updates is necessary to ensure optimal performance and battery charging functionality.

Embrace the following emotions through this process:

  • Frustration turning into relief as firmware updates offer solutions.
  • Excitement for enhanced compatibility and improved performance.
  • Eagerness to resolve battery charging issues efficiently.
  • Confidence in the drone's optimal functionality after firmware updates.

Battery Temperature Check

Ensuring the battery temperature falls within the safe range of 5°C to 40°C is crucial before initiating the charging process for your DJI Phantom 3 Battery. Extreme temperatures can prevent the battery from charging properly, so it's essential to allow it to cool or warm up to room temperature if needed. High amperage or poor maintenance can lead to high battery temperatures, triggering safety sensors that prevent the battery from charging to avoid damage.

It's important to avoid exposing the battery to direct sunlight or other heat sources that could affect its temperature. Monitoring the battery temperature is vital for successful and efficient charging to maintain the health of your LiPo battery. Using a Lithium Polymer balance charger can help ensure that the battery temperature remains within the safe range and that the charging process is conducted safely and effectively.

Pin Examination

To ensure the proper functioning of your DJI Phantom 3 Battery, a thorough examination of the pins for damage, cleanliness, and alignment is essential. Proper inspection of the pins is crucial for maintaining a secure connection during charging and optimizing the battery's performance.

Here are some key steps to consider during the pin examination:

  • Inspect for Damage: Check the pins carefully for any signs of damage, such as bends or breaks, that could hinder the charging process.
  • Cleanliness is Key: Use isopropyl alcohol and a soft cloth to clean the pins and ensure that there are no obstructions that may prevent a proper connection.
  • Alignment Matters: Look out for any misalignment or bent pins that could affect the battery's charging capabilities.
  • Regular Inspection: Make it a habit to regularly inspect and maintain the pins to prevent issues with charging and to uphold the battery's overall performance.

Cell Health Assessment

Using the DJI Assistant 2 software allows for a comprehensive assessment of the health of individual cells within the Phantom 3 battery. By monitoring the voltage levels of each cell, potential imbalances or issues affecting charging can be identified. Analyzing the cell voltage readings helps in determining if any cells are damaged or failing, which could impact the drone's flight performance.

If any imbalances are detected, a cell balancing procedure should be performed to optimize battery functionality. It is crucial to regularly check and maintain the health of each cell to ensure proper charging and extend the battery's lifespan. Proper battery maintenance, including cell health assessment, is essential for safe and efficient drone operations.

Hibernation Mode Check

After an extended period of disuse, DJI Phantom 3 batteries may enter hibernation mode, which can be identified by a lack of response when attempting to charge the battery. To bring the battery out of hibernation and fix the issue, a systematic approach is necessary. Here are some steps to consider:

  • Check Battery Temperature: Ensure the temperature of the battery is within the appropriate range for charging.
  • Press and Hold Power Button: Press and hold the power button on the battery for a few seconds to check for any response.
  • Use Official Charging Equipment: Opt for official DJI Phantom 3 charging equipment for qualifying purchases.
  • Follow Manufacturer Guidelines: Refer to the manufacturer's guidelines on waking the battery from hibernation mode.

Proper Battery Maintenance

Following the considerations for hibernation mode checking, maintaining Phantom 3 batteries correctly is essential for optimal performance and longevity. To ensure the batteries remain in optimal condition, it is recommended to store them at a charge level of 40-50%. Avoiding complete drainage, which can harm the cells, is crucial; it's advised not to let the battery level drop below 5%.

Performing a full discharge and recharge cycle every three months helps maintain battery health. Some Phantom 3 batteries offer auto-discharge firmware updates as an added feature for convenience. Proper storage and maintenance practices, such as using a LiPo balance charger or NiMH charger designed for lithium batteries, are crucial for extending the battery's lifespan.

Troubleshooting Common Issues

When encountering difficulties with the DJI Phantom drone battery, a systematic approach to troubleshooting is crucial for identifying and resolving common issues efficiently.

To tackle battery issues effectively, consider the following steps:

  • Check for a red light followed by 3 green flashes, indicating a potential issue.
  • Attempt a forced charge by pressing and holding the red button for 2 seconds.
  • Consult the manual for specific insights on troubleshooting battery problems.
  • Verify if the battery maintains power but does not go below the low power threshold.

For more in-depth assistance, utilize online resources such as the Phantom Help website, which offers detailed troubleshooting guides.

Frequently Asked Questions

Why Is My Phantom 3 Battery Not Charging?

The Phantom 3 battery may fail to charge due to internal faults, depleted cells, or damaged circuitry. Proper diagnosis by a qualified technician is essential to pinpoint the exact issue. In-depth testing and potential replacement may be necessary for resolution.

How Do You Get a Phantom 3 Battery Out of Hibernation Mode?

To exit hibernation mode on a Phantom 3 battery, press and hold the power button for an extended period, typically 8 seconds or more. This safety feature activates when the battery remains unused for a prolonged duration, affecting its charging capabilities.

How Do I Know if My DJI Battery Is Bad?

To determine if a DJI battery is bad, check for physical damage, use the DJI GO app to assess health status, inspect for error messages or warning lights, and test the battery in a different drone for consistency. Consider professional evaluation or replacement if needed.

Can DJI Batteries Be Repaired?

DJI batteries can sometimes be repaired, but the process can be risky and may void the warranty. It is advisable to explore warranty coverage or seek authorized repair services before attempting self-repairs or turning to third-party options.


In conclusion, addressing issues with DJI Phantom 3 battery not charging requires a systematic approach. This includes:

  • Charger inspection
  • Firmware update
  • Battery temperature check
  • Pin examination
  • Cell health assessment
  • Hibernation mode check
  • Proper battery maintenance
  • Troubleshooting common issues

Following these steps can help diagnose and resolve the problem effectively, ensuring optimal performance and longevity of the battery.

Sharing is caring.
Alex Mitchell
Alex Mitchell

Alex Dockman is an IT Systems Engineer and tech enthusiast with a knack for making complex technology topics understandable. With a background in Computer Science and hands-on experience in Silicon Valley, he shares his insights on docking stations and connectivity solutions, helping readers navigate the tech world. Alex's writing is known for its clarity and precision, making technology accessible to all.

Leave a Reply

Your email address will not be published. Required fields are marked *